Wall Cabinet Gas Struts – 150mm 100N – 10mm Ball Stud with L Brackets – Pair (2 Pack)
✓ IN STOCK - SHIPS TODAY
Compact lift assistance engineered specifically for wall-mounted kitchen and furniture cabinets.
This 150mm 100N gas strut pair is designed for lightweight lift-up cupboard doors commonly found in kitchen wall cabinets, bathroom units, utility cupboards and overhead storage furniture.
Unlike long-stroke outdoor or deck box struts, this configuration is optimised for short travel geometry, limited cabinet depth and controlled indoor movement.
Product Specification
-
Force: 100N per strut (200N combined support)
-
Extended Length: 150mm (centre-to-centre)
-
Stroke Length: Compact stroke suitable for shallow cabinets
-
End Fittings: 10mm snap-on ball socket
-
Stud Thread: M6 ball studs included
-
Bracket Type: 2x L Brackets (wall side mounting)
-
Pack Size: Left & Right matched pair
Where This Model Works Best
This 150mm version is intended for shallow wall cabinet doors where internal space is limited and long struts cannot operate correctly.
- Kitchen wall cupboards
- Bathroom mirror cabinets
- Utility room wall storage
- Overhead furniture compartments
Recommended Door Weight (using two struts): 2–5kg
Recommended Door Height/Depth: Typically under 400mm
If your cabinet door exceeds these limits, consider a longer 200mm or 250mm configuration.
How 100N Performs in Wall Cabinets
100N provides controlled upward assistance without aggressively pushing the door open. When correctly positioned, the door will:
- Lift smoothly from the closed position
- Stay open without manual holding
- Close with controlled resistance
- Reduce strain on hinges over time
This force rating is intentionally balanced for light cabinet panels. Over-specifying force (such as 200N or 300N in small cabinets) can cause excessive opening pressure.
L Bracket Mounting System
The included L brackets are engineered for side-wall installation inside cabinet frames. This creates proper angle geometry for short-length struts.
- Provides an offset from the cabinet wall
- Ensures correct pivot alignment
- Improves long-term hinge protection
- Suitable for standard MDF or plywood cabinet carcasses
This configuration is purpose-built for indoor cabinetry — not for outdoor deck boxes or heavy chest lids.
Installation Guidance
- Install one strut per side
- Mount the upper bracket approximately 15–25% down from hinge line
- Position lower bracket to ensure slight compression when closed
- Always test-fit before final screw tightening
Correct bracket placement directly determines lifting performance.
Choosing the Correct Force
- Door under 3kg → 100N ideal
- Door 4–6kg → consider 150N or 200N (longer model may be required)
- Door over 6kg → 150mm model not recommended
Only calculate the weight of the door panel — exclude cabinet contents.
Safety & Usage Notes
- Indoor use recommended
- Not designed for heavy timber lids
- Do not install upside down unless specified
- Replace both struts together for balanced performance
AUTORCE Wall Cabinet Series
- Calibrated force accuracy
- UK stock & fast dispatch
- Matched pair consistency
- Dedicated UK support
Designed specifically for compact wall-mounted cabinetry, this 150mm 100N model delivers precise, space-efficient lift support for lightweight cupboard doors.
